Enough of wondering whether screws work on wood or not. You could create seamless wood joints with these tiny screws. But how to join two pieces of wood with screws? Let’s find out.
Look, screws are one of the best solutions for creating a solid joint. If done correctly, it leads to countless years of service. Where’s weak join might be one thing you want to avoid.
The key is to create a cohesive joint with proper screws and processes. It lets you get more out of your wood join and stick multiple wood pieces together for long-term service.
Why Join Two Pieces of Wood with Screws?
Because joining two pieces of wood with screws is one of the most secure ways. Plus, it’s one of the fastest options to go. Of course, you could go straight into the screwing process. You get tons of variations when it comes to joining.
Joining wood with secure screwing could provide you with the best possible joint. It would provide you with one of the long-lasting joints for wood. Moreover, it is also one of the cheapest ways to go. So overall it has a lot of advantages. Let’s find out how to do it the right way.
Step by Step Guide on How to Join Two Pieces of Wood with Screws
Below are the steps you should follow to get better jointing of wood with screws. You will need these steps to create better wood screw joints. So, let’s get into it right now.
Steps 1: Manage Your Woods
In the first step, you need to manage your wood in one place. Make sure both of the woods are in good condition. When you put both pieces of wood side by side, both should go along. The surfaces should form a smoother connection as well.
Step 2: Create a Clearance Hole
Now, mark the points on the wood where you want to screw on. You could use any temporary screw or marker to create a cross point on the surface. However, it would better help you to create a pilot hole. In other words, it is also called a clearance hole.
In case you need to create angled wood joints, create pocket holes. Pocket holes are great for letting you screw wood at a certain angle hole. It works great each time and provides a great wood join for most of the structure.
Step 3: Use Counter Sink
Right now, you need to use a perfect counter sink that would fit the angle of your screw head. The counter sink is a normal drill bit, but they have the same angle and are in line with the screw you are trying to drill.
Using countersink drill bits lets you align the screw heads to the surface of the wood you are drilling.
Note: You must select the drill bits according to the screw head. It would make the whole process a lot easier.
Step 4: Go for Drilling
In the following step, you must start drilling the screws. Before starting the drilling task, ensure both of your wood is aligned to the point you want. Once everything is in place, take your drilling unit and place the head of the screw to the end of the drilling bits.
Now, place the end of the screw in the pilot hole. Start triggering the drilling unit action. Make sure you put ample pressure while drilling the unit. Keep on drilling until the head of the screw also aligns with the surface of the wood.
Read: How To Use Wood Glue With Screws In A Proper Way
How To Join Two Pieces of Wood (End to End)
Let’s start making a solid joint between two pieces of wood from end to end. Hence, you could create a decent joint on both ends of the wood using the following options.
Using Wood Strap
One of the most reliable ways to join two wood ends is a wood strap. A plywood strap would be enough to join two kinds of wood. But, first, you need to create a wood strap. As a rule of thumb, the thicker the wood strap, the better it would work to create a joint.
After you create the wood strap, place it on the point where two ends of the wood meet. Afterward, mark the points you want to drill screws on. Afterward, create a pilot hole and create a perfect countersink as well. Now, drill on the marked points, and it’s done.
Note: You could place a wood strap on both sides of the wood join. But one side would work as well.
Using Pocket Hole
The pocket hole could be a great option, even on the ends of two wood pieces. First, you need to mark the places to create a pilot hole. Then, you could use tools like pocket hole jigs to create perfect pocket holes. It would provide the perfect angle and depth to create a better pocket hole on the wood surface.
Recommended: How to Seal Acrylic Paint on Wood? 10 Practical Techniques
FAQs
Let’s get into the FAQs, which would help you gain in-depth knowledge on wood jointing with screws.
Should I Use Any Specific Kind of Screw for Wood?
Yes, some of the screws are great for working on wood surfaces. One of them is a countersunk screw set. These kinds of screws get perfect placement on wood surfaces. As a result, it works great and blends with the wood surface seamlessly.
Is It Important to Use Pocket Hole Jigs?
Want to create ideal pocket holes? Jigs are a great option. Cause you get proper guidelines on how much to dig deep. Plus, you get a proper sense of the width you need to create for better screwing. So overall, using jigs can help you create the perfect pocket holes.
Read: How To Use Hot Glue Without Gun: The Best Handy Ways
What If We Don’t Create Countersink Beforehand?
Their screw won’t blend into the wood surface for people who don’t use a countersink. The counter sink lets us blend the screw head to stay aligned with the wood surface. It makes the wood sculpture look great and makes the screw safe from any angled forces.
Verdicts
That’s how you know how to join two pieces of wood with screws. It’s straightforward to follow. With better preparation, anyone could take on the task.
Hence, with better screw joints, you could create a seamless wood structure. As a result, your structure will not tear out any sooner. Plus, it helps you to avoid any short-term costs that may arise on your wood structure.
Creating perfect joints on wood is a lot more crucial than you might ever think. That’s why learning to create perfect wood screw joints is a wise step.
