How To Screw into Pressure-Treated Wood: Simple Steps Ever

Pressure-treated wood is known for its long-term usage. But your deck or DIY wood structure might get a big hit when you screw it in the wrong way. To avoid this situation, let’s learn how to screw into pressure-treated wood.

Maintaining the right screwing process can improve your wood structure’s condition even in wet situations.

Whether it’s your front yard deck or landscaping projects, keeping your wood in good condition is the key.

Plus, right screwing creates amazing joints which do great in both indoor and outdoor spaces.

More about Pressure-Treated Wood

Before getting into screwing the Pressure-treated wood, let’s know about it. Simply put, pressure-treated woods are high-pressure chemical exposure. In turn, the following woods tend to be in shape for longer. Plus, it becomes resistant to corrosion as well.

But, if you are not using the right type of screws, it might trigger the corrosion process of the pressure-treated wood. Hence, it won’t be a good step for you to screw in any fasteners. Therefore, making sure the use of the right process for screening these woods is more crucial.

Which Type of Screws Are Best for Pressure-Treated Wood?

Even though normal screws are not suitable to use on pressure-treated woods, you have three options. Below are featured screws which would be a great pick to go for as they don’t cause corrosion on wood.

Stainless Steel Screws

Among the screws, stainless steel screws are the best to fasten any pressure-treated wood. Because these sorts of screws resist carrion itself, making your wood safe. Even in humid situations, these screws will provide great results immediately. 

Silicon Bronze Screws

Silicon bronze screws might be expensive, but they work great to avoid corrosion. As a result, you have the luxury of using it on pressure-treated wood units. It does great on these kinds of woods. As a result, the wood stays clean and free of corrosion. 

Coated Steel Screws

As most pressure-treated wood gets exposed to wet and humid conditions, using coated screws is still the way to go. Cause it contains an extra protective layer. The following protective layer helps prevent corrosion from occurring. Hence, these screws stay clean even when they get into contact with water.

Wood Screws Vs. Deck Screws: Which one to go?

For your brief introduction, wood screws are the ones that get used in wood joinery. It’s best to stick two wood pieces together. But the downside is that the screws are not good for outdoor and humid situations. 

To counter the drawback of ordinary wood screws, we have deck screws. As you could guess, it gets used for deck woods. Hence, if you build a deck with pressure-treated wood, make sure you use it. 

Related: How To Screw Into Existing Holes: DIY Walkthrough

How To Screw into Pressure-Treated Wood

Enough of screw selection; let’s start the process of screwing an actual pressure-treated wood. You only need three different steps to do so. Let’s get in.

Step 1: Drill on the Wood

As a first step, you only have to arrange the wood and mark a point you want to screw. You could use temporary ink to create a visible point yet don’t damage the wood. Once you made all the markings. It’s time to start drilling it.

Take your drilling unit and create a clean drill on the marking. The drilling makes for a smoother process when you put the thread on the wood. In addition, it makes the whole process trouble-free. 

Step 2: Collect the Right Screws

You need to arrange the right screw for you in the following step. Depending on where you want to use the wood, you could choose any of the corruption-free screws. For example, if your wood structure will get regular exposure to wet conditions, using Coated Steel Screws is a must.

Step 3: Start Drilling the Screws

Now, you need to stick the head of the screw into the tip of your drill bit. Afterward, place the end of the screw, on the whole, you have created in Step: 1. Then, start using your drilling unit to go until you align the screw head to the wood surface. 

Note: you might keep the screw head lower than the wood surface. 


Below are some of the questions which are helpful on screwing on pressure-treated wood.

Why do we need to screw pressure-treated wood?

Cause, you won’t be able to join two pieces of pressure-treated wood without the proper screws. Hence, screwing is the best option to create a proper wood structure. But unlike a normal wood, you must be a bit picky when determining screw sets.

Why is using the right screw on pressure-treated wood crucial?

When you use the wrong kind of screws on the wood, it can create corrections on the wood. As a result, the corrosion-resistant feature of the wood starts to stop working. As a result, the wood starts to get damaged, and its lifespan turns way shorter than before.

Does using a deck drive improve productivity on screwing?

Deck drive works great when you are working on deck wood surfaces. For example, using a deck drive, you could perform drilling without bending down the surface. It improves productivity and adds a flow to your large woodworking process.

Read more: What Temperature Does Hot Glue Melt: An Accurate Guide

Bottom Line

Learning to screw into pressure-treated wood is a key aspect of the woodworking process. It’s a must, even if you are working on a DIY wood structure. 

Hence, always be mindful when choosing the screws for your wood. Wrong wood can damage your wood structure in the long run.

 Even if the screws might cost a bit, always go for a quality one. It helps you cut the future cost of the wood structure you are working in.

Let alone all the advice, be yourself and choose the screw which you think would be a better suit for the long run.

Want to Learn More:

How Long Should A Deck Screw Be: Real-Time Analysis

Where to Recycle Nails and Screws? 5 Exclusive Ideas

Valuable Tips on How to Fix a Stripped Screw Hole in Plastic

Why Use Dowels Instead of Screws? Expert’s Guide

Hey, I'm George Fanton. I've over nine years of experience in the woodworking industry. I've cultivated a deep interest in practical wood and tasks. I enjoy sharing new information on woodworking technology to maintain my expertise in the current woodworking industries.

Leave a Comment