How to Use Gorilla Glue on Plastic: The 6 Easiest Ways 

Gorilla glue has become a popular adhesive that is used for a variety of household projects. The popularity of this glue has increased due to its high strength and fast set time.

If you are a DIYer or a house owner but still have no idea how to use gorilla glue on plastic, this essential guide is for you. This article will help a lot to get a thorough understanding of each step that needs to be followed. 

What is the Purpose of using Gorilla Glue?

Gorilla glue is a type of glue that is used for DIY activities and many household works. Gorilla glue should be your go-to if you are searching for suitable adhesives to give long-lasting repairs. The house owner and DIYers benefit effectively from this glue because this glue makes a strong bond. The gorilla glue is very easy to use; make sure you clamp the glue for an hour, and it is water-resistant. This glue is white, but it becomes tan after getting cured. This glue is recommended to DIYers or house owners since it works effectively on different types of plastics.

Let’s Get Introduced to the Ways to Use Gorilla Glue on Plastic

Don’t you have any handy glue in front of you? Use gorilla glue which can be a good fit for your project. Before using the adhesive on plastic, you must gather the necessary tools and then go ahead with the steps. Note down the steps to follow-

Step 1: Gathering the tools 

Take a rag you need to use for cleaning and some water to where you need to soak the rag. Make sure you have a scope to clamp the parts together. Hand gloves should also be there in your collection if you have sensitive skin.

Step 2: Preparing the surface before applying the glue

After having all the tools for getting the project started, you need to clean and prepare the surface. You can use sandpaper to make a rough surface and clean the surface properly. A damp cloth can wet one side of the surface without saturating it.  

Step 3: Applying the gorilla glue 

Once you prepare the surface with sandpaper, you can apply gorilla glue to the dry surface. 

Step 4: Clamping the surfaces together 

After applying the glue sparingly to the plastic surface, clamp the surfaces together tightly. Depending on the object you are gluing, you might need a heavy object instead of a clamp sometimes. Heavier things are necessary to hold bigger things together, and simple rubber bands or tape are required in order to keep smaller items together. 

Step 5: Scrape off the dried glue 

Finally, it would help if you wiped the wet glue with a dry cloth. Then, you can sand or scrape off the dried glue. 

Step 6: Leave the glue to dry

The gorilla glue will take 24 hours to dry on the plastic item. It would help if you waited approximately one day to sit on the product and cure it completely. It might sound surprising to know why the glue would take 24 hours, though it takes only 1-2 hours to clamp on the surface. However, as you want the bond to be strong and get the best result, you must follow the steps accurately. 

Read: How To Hide Screws In Plywood? 8 Effective Ways

Is it possible to Use Gorilla Glue on Plastic Dishes?

Yes, but you shouldn’t. It is not about gorilla glue; you shouldn’t use any glue on items used as food dishes. Plastic dishes are usually used for serving food. The poison the gorilla glue contains might have a side effect on health. Kids are likely to play with plastic toys. So, it would be best if you also didn’t use gorilla glue to fix the kid’s plastic toys. We all know kids are very likely to chew and suck the toys they play with. That’s why we should be very conscious about not using glue on kids’ plastic toys. 

Ways to Get the Gorilla Glue off Your Hands

We all know it is irritating to get glue on the skin. Sometimes the adhesive formulation is so potent that it creates irritation on your hand. However, don’t go so rushed by pulling the gorilla glue off the skin. Be patient to soak the bonded area in warm and soapy water. You will see how easily you can rub the glue and loosen it, so the glue comes off.

One more convenient way to get the gorilla glue off your hands is by using acetone. You need to follow the manufacturer’s instructions given on the label while using it to remove the glue

Another way to remove the glue is using nail polish remover. This is also an easy trick but will make your hand skin dry. So, it is better to use a moisturizer after using the nail polish remover or acetone. 

Related: How To Use Wood Glue With Screws In A Proper Way


Is gorilla glue perfect for heavy-duty work?

Gorilla glue is a well-known adhesive for its quality, strength, and long-lasting bond. This adhesive can work well on challenging projects if you use it correctly, but things like plastics are complicated to glue. Yet, gorilla glue can give the best result on plastics too.

How much gorilla glue needs to be applied?

Just a thin layer of glue would be enough. The more you apply to the item, the more time it needs to dry and make weaker bonds. So, a thin layer will go well with the project. 

Why is clamping needed?

Gorilla glue expands, and to create a strong bond, you must put clamping pressure on the project. The more substantial pressure you give, the better result you can expect.

Final Words

The adhesive quality and formulations depend on the glue’s expansion. You shouldn’t expect gorilla glue to work on all plastic products. Before using the gorilla glue, and the plastic surface first, so the glue can sit well.

However, the bond can’t ever be too strong on plastic. If you use it correctly, gorilla glue can give a long-lasting bond. For that, you must go through the steps on how to use gorilla glue on plastic effectively. 

Read More:

Hey, I'm George Fanton. I've over nine years of experience in the woodworking industry. I've cultivated a deep interest in practical wood and tasks. I enjoy sharing new information on woodworking technology to maintain my expertise in the current woodworking industries.

Leave a Comment